Newster NW10

Company name :

Newster

Product name:

Newster NW10

Price :

0

Details:


Newster is a patented technology for the processing of solid hospital potentially infectious waste based on frictional heating treatment. The residue obtained is sterilized, finely grinded, dry and reduced in weight/ volume.

The treatment principle is tested, patented and certified. It is the most valid alternative currently available to traditional disposing methods like incineration.

The use of on-site technologies allows the remarkable reducing of the facilities’ costs for disposal, increases the hygiene quality, improves the safety of the personnel, contributes to reducing  produced waste quantity and also reduces the environmental impact to near zero in accordance with the trend of reduction of environmental emissions and risks arising from the transport of infectious waste.

Newster NW10

The Newster NW10 machine was designed for use in medium size  hospitals. The design allows the system to work for several shifts.  The system can be equipped with a water recycling system, which guarantees maximum effectiveness, safety and work continuity besides a further reduction of running costs. A specially designed system for the discharge of the material allows the operator to manage the treated waste easily.

 

 NEWSTER® NW10 - Sterilizer for potentially infectious healthcare waste
 

 Technical Specifications
 

 Sterilization method

 Unpressurized moist heat

 Heating method

 by impact and friction of the waste

 Processing potential

 30kg/h1
 320 lt/h

 External aspect of treated waste

 Homogeneous small-sized granules

 Final weight of treated waste

 70-75% of initial weight

 Final volume of  treated waste

 20-25% of initial volume

 Sterilization vessel volume                               

 Roughly 152 liters
 Ø= 500 mm, H= 776 mm

 Overall control system

 Programmable logic controller (PLC)

 Temperature measurement

 By variable-resistance sensors

 Cycle recording

 Time-temperature flow recording

 Final cooling

 Roughly 95°C through H2O evaporation

 Dust abatement

 in humid environment

 Vessel lid closure

 Manual, mechanical blocking and double safety device

 Safety devices

 Mechanical blocking system of sterilization vessel lid ; Power  supply to main engine is cut off in case of lid blocking failure. Low  voltage command and control panel with automatic power cut-off if  panels are open ; electrical resistor heating system to be used in  case of emergency stop

 Rotating blades and fixed contrablades

 Made of special metal alloys

 H2O Consumption

 Roughly 75 lt/h
 Roughly 50 lt/day with water recycling system (optional)

 Water discharge

 40 mm diameter sewer pipe equipped with a trap

 Power consumption

 overall max 25 kW
 average 18 kW/h


 Size and weight
 

 Sterilizer

 80 x 160 x 150 cm

 Filter Group

 80 x 35 x 150 cm

 Electric board

 80 x 50 x 160 cm

 Total weight

 980 kg



1) Depending on the percentage of humidity and density

The above specifications are intended for information purposes only and may be subject to change without prior notice.